MYERS ME40 RESIDENTIAL EFFLUENT AND DRAIN WATER PUMPS – cast iron, engineered thermoplastic, and stainless steel material

Description

MYERS ME40 RESIDENTIAL EFFLUENT AND DRAIN WATER PUMPS – cast iron, engineered thermoplastic, and stainless steel material

The Myers ME40 Series Effluent Pumps are one of the
industry’s most efficient models featuring a 4/10 HP motor.
This powerful pump provides the flow and head required
for demanding dosing systems and drainage applications.
The ME40 incorporates a combined cast iron, engineered
thermoplastic, and stainless steel to produce a powerful and
highly durable pump. Available with automatic float switch or
manual models for use with external controls for precision
dosing installations.

APPLICATIONS:
Residential effluent removal, sump drainage, water transfer,
and flood control.

FEATURES:

Efficient Dosing: Two-vane cast iron impeller design
provides maximum dosing efficiency.

Powerful Torque: High-torque, permanent split
capacitor (PSC) motor. No starting switches or relays to
wear out.

Rugged and Cool: Rugged-built, oil-filled motor for
continuous bearing lubrication and maximum
heat dissipation.

 eal Protection: Lower ball bearing and heavy duty Type
6 seal for added pump life.

Automatically Better: Field-tested, wide-angle,
mercury-free float switch provides maximum drawdown
(automatic models only).

Dual Operation: Automatic float switch or manual
operation by plugging directly into outlet.

Thermal Protection: Heat sensor overload protection
with automatic reset when motor cools to a safe
operating temperature.

SPECIFICATIONS:

 Capacities: 80 GPM (303 LPM)
 Shut-Off Head: 32’ (9.75 m)
 Operation: Manual or automatic
 Max. Spherical Solids: 3/4” (19 mm)
 Liquids Handling: Domestic effluent and drain water
 Intermittent Liquid Temp.: Up to 140°F (60°C)
 Motor/Electrical Data:4/10 HP, 1650 RPM, oil-filled,
permanent split capacitor type, 115V, 12A, 1Ø, 60Hz;
230V, 6A, 1Ø, 60Hz
 Acceptable pH Range: 5-9
 Specific Gravity:9-1.1
 Viscosity: 28-35 SSU
 Discharge NPT:1-1/2”
 Motor Housing: Cast iron
 Casing: Thermoplastic
 Minimum Basin Diameter: Simplex: 24” (61.0 cm)
Duplex: 36” (91.4 cm)
 Power Cord: 10’ or 20’, 16/3, SJTW (3.1 m) and (6.1 m)

ME40 Data Info

ME40 Manual