Description
PCD 90° V GROOVING 1/4″ SHANK
#DRB-418
| (a°) Angle | 90° |
|---|---|
| (D) Diameter | 1/2 |
| D1 | 0.004″ |
| (B) Cutting Height | 1/4 |
| B1 | 3/8 |
| (d) Shank | 1/4 |
| Overall Length (L) | 2-1/4 |
| Max RPM | 24,000 |
| Flutes | 1 |
Diamond is the hardest material on the earth. Polycrystalline Diamond (PCD) tooling is manufactured in a high-temperature and high-pressure laboratory that fuses diamond particles onto a carbide substrate which allows the diamond to be brazed onto a tool body.
If you’re looking for the ultimate in tooling you’ve found it! Amana Tool®’s PCD tipped 90 degree engraving V-grooving and chamfering CNC router bits will groove a wide variety of tough abrasive materials including composites particleboard MDF (both raw or with melamine) veneer and hardwoods. The cutting edge lasts much longer than carbide for extremely long life.
Excellent for V-Grooving and Chamfering:
- Aluminum Composite Material (ACM)
- Carbon Fiber
- Composites
- Composite Decking
- Hard Wood
- Laminated Chipboard and MDF
- Plywood Veneer
- Soft Wood
- Solid Surface
- Synthetic and Homogenous Marble
Reviews
There are no reviews yet.