Description
W.L. Fuller Inc. Brad-Point Drill Bits – Short Length (5/64 to 1/2 Inch HSS)
WL Fuller’s short length 5/64 to 1/2 inch brad-point drill bits are top quality high-speed steel (HSS) and are designed for clean holes in wood, plastics, and sheet metals. The tip of a brad-point drill allows you to perfectly align the center of the hole without drifting as with a v-point or regular drill bit. NOTE: Sizes below with cutting diameters greater than 1/2 inch may not fit in your chuck. Pricing to ground shanks to smaller diameters is available upon request. Legend below explains sizing. Select your item(s) then click Add to Cart.
Legend (in inches unless otherwise noted):
- CD = Cutting Diameter
- DE = Decimal Equivalent
- FL = Flute Length
- OL = Overall Length
- RHR = Right-Hand Rotation
- LHR = Left-Hand Rotation
Technical Info
W.L. Fuller Inc. is a family owned, third generation, manufacturer of the best countersinks, counterbores, plug cutters, taper point drills, brad-point drills, and step drills. They have over 60 years of experience in manufacturing tools to cut woods, plastics, and metals.
Additional information
| Weight | N/A |
|---|---|
| CD – Cutting Diameter |
1/2 in, 1/4 in, 1/8 in, 3/16 in, 3/8 in, 3/32 in, 5/16 in, 5/64 in, 5/32 in, 7/16 in, 7/64 in, 7/32 in, 9/32 in, 9/64 in, 11/64 in, 11/32 in, 13/64 in, 13/16 in, 13/32 in, 15/64 in, 15/32 in, 17/64 in, 19/64 in, 21/64 in, 23/64 in, 25/64 in, 27/64 in, 29/64 in, 31/64 in |
Reviews
There are no reviews yet.